connectors (inlets/outlets) 6 20-5 www.schurter.com/pg0 7 connectors iec appliance inlet c16a, snap-in mounting, front side, solder or quick-connect terminal 6120-5 c16 a 155 c description - panel mount: snap-in version from front side - appliance inlet, pin temperature 155 c, protection class i - solder terminals or quick connect terminals approvals - vde license number: 40015595 - ul license number: e96454 other versions on request - other panel thickness - quick-connect terminals 4.8 x 0.8 mm - types for enhanced glow wire test requirements acc. iec 60695-2- 11 to -13 for the use in unattended household equipment acc. iec 60335-1 references general product informatio n weblinks approval s , roh s , china-roh s , mating connector s , e-stor e , distributor-stock-chec k , accessorie s technical data ratings iec 10 a / 250 vac; 50 hz ratings ul/csa 15 a / 250 vac; 60 hz dielectric strength > 2 kvac between l-n > 2 kvac between l/n-pe (1 min/50 hz) allowable operation temp. -25 c to 155 c degree of protection from front side ip 30 acc. to iec 60529 protection class suitable for appliances with protection class 1 acc. to iec 61140 terminal solder terminals or quick connect ter - minals panel thickness s snap-in: 1.5/2.5/3 mm material: housing thermoplastic, black, ul 94v-0 appliance inlet c16a acc. to iec/en 60320-1, ul 498, csa c22.2 no. 42 (for very hot conditions) pin-temperature 155 c, 10 a, protection class 1 dimensions 30 mm 6120-5 max.r3 20 27.5 s 30 23 e 3 +0.2 0 +0.2 0 0.1 e: solder terminals: 22.5 mm e: quick connect terminals: 25.5 mm s: 1.5; 2.5; 3.0 mm
2 connectors (inlets/outlets) 6 20-5 www.schurter.com/pg0 7 connectors variants type panel mounting panel thickness s [mm] terminal order number 6120-5 snap-in 1.5 quick connect terminals 6.3 x 0.8 mm 6120.5315 6120-5 snap-in 2.5 quick connect terminals 6.3 x 0.8 mm 6120.5325 6120-5 snap-in 3 quick connect terminals 6.3 x 0.8 mm 6120.5330 6120-5 snap-in 1.5 solder terminals 3.8 x 0.8 mm 6120.5115 6120-5 snap-in 2.5 solder terminals 3.8 x 0.8 mm 6120.5125 6120-5 snap-in 3 solder terminals 3.8 x 0.8 mm 6120.5130 articles for enhanced glow wire test requirements acc. iec 60695-2-11 to -13 can be ordered with ending ".15" (xxxx.xxxx.15). they are suitable for the use in unattended household equipment acc. iec 60335-1. packaging unit 50 pcs mating outlets/connector s category / description connector overview complet e iec connector c15a, rewireable, straight 010 2 iec connector c15a, rewireable, straight 0102- g iec connector c15a, rewireable, angled 011 2 connector further types to 6120- 5 the specifications, descriptions and illustrations indicated in this document are based on current information. all content is subject to modifications and amendments.
|